News

How Important Is Attic Ventilation in the Winter?Posted by Nicole on February 26th, 2019

Many homeowners believe that ventilation is only important in the summer, but it is just as important in the winter! Did you know that the primary cause of ice dams is lack of ventilation, not necessarily lack of insulation?

Ice dams are barriers that occur near the gutters and eaves of the roof, causing water/ice to back up under the shingles at the drip edge. The cycle begins with heat being trapped in the attic (lack of exhaust ventilation) which traps heat in the upper attic near the ridge. This condition melts the snow/ice at the top portion of the roof and prevents the snow/ice from melting near the bottom of the roof (at eaves/overhangs). The melted snow/ice then runs down the roof and collects at the eaves where it freezes/refreezes, creating an ice dam.

Large snow events are rare in Portland, but severe ice damming can cause the shingles, roof sheathing, rafter/truss tails and top plate to be damaged. If not fixed, the damage can cause mold and mildew.

Although adding more insulation can slow down the heat transfer from the interior living space, the heat transfer will still occur and, without appropriate ventilation to take that warm air away, the ice dam will occur.

It is important to note that your attic should be very close to the exterior temperature! A well-ventilated, well-balanced ventilation system ideally keeps the top of the roof and the bottom side of the roof close to equal temperatures, eliminating the conditions required to form an ice dam.

Call me if you’d like an evaluation of the ventilation and insulation in your attic! Building science is my passion.


Ice dam

Diagram courtesy of Connell Insurance.

6 Reasons to Clean Your Furnace & DuctsPosted by admin on March 23rd, 2015

I recently had the ducts and furnace cleaned at my house. Why, you ask? Here are 6 reasons to clean your furnace & ducts:

1. The life of your furnace. Dirt slows down air movement and creates more resistance so that your furnace has to work harder, reducing the life of the equipment and ultimately costing you more money. This dirt gets stuck inside your ducts, furnace and a good portion gets stuck to your filter. (That means it is VERY important to change or clean your filter so that your furnace doesn’t have to work so hard to push the air through a filthy filter!)

2. Allergies and cleaner air. Even if you don’t have allergies, whatever is blowing around in the air can tickle your nose and get into your lungs. AaaaaahCHOO!

3. Breathe your own air. Especially if you’re moving into a new home, you don’t want to be breathing in someone else’s dust or dead skin, allergens/pollens, dirt and pet hair from 12 years ago. When years of build-up is camped out in your furnace and ducting, a lot of it can just be re-circulated into the air you breathe. Ewwwww!

4. Mold! Air has moisture. Moisture likes to stay in cozy areas. Cozy areas provide a nice home for mold. Where is pretty cozy in your house? Your heating ducts!

5. The secret is the filter. Have you done a remodeling project lately? Has there recently been road construction nearby your house? Any thing that increases particles in the air of your home means that at the very least, your filter probably needs to be changed. Those particles can fill up a filter faster than you think. Depending on how often you use your heating/cooling system,  the depth of your filter, your family’s daily life (smoking, allergies) and if you have pets, it should be changed every 1-3 months. When in doubt, change it out. It is MUCH cheaper to clean or change your filter regularly than to pay for a new furnace.

6. Less dust. If you’re like me, you have little time or energy left after a busy week to clean. Let your filter do the work- you can sit back and relax.

The following are photos of my furnace blower and return air duct the before and after it was cleaned. If I inspect a house and I see a dirty blower or ducts, I recommend cleaning. If I don’t see maintenance records for the furnace, I recommend a complete service.

Furnace blower after cleaning

Furnace blower after cleaning

Furnace blower before cleaning

Furnace blower before cleaning

clean return air duct

clean return air duct

Return duct before cleaning

Return duct before cleaning

Autumn Maintenance – get ready for the rain and cooler temperatures!Posted by admin on October 26th, 2012

It’s the time of year when we are forced to say goodbye to warm, dry weather and hello to cooler, wet weather. This means that you should make sure your home is weatherized and ready to go when you have to turn the heat on. Weatherizing your home can save you hundreds of dollars per year in energy costs and will make your living space much more comfortable. Follow these tips to prepare your home for fall!

Change your furnace air filter if you didn’t change it at the end of the summer. A dirty filter can make air flow difficult, which is hard on your furnace- it can reduce the life and cost you money before it was ready to be replaced. It’s also good to get the old particles from last season out of your house, especially if you have allergies.

Clean and inspect the gutters. Get rid of leaves & debris before the rains come along and clog up the system. Evaluate the overall condition of the gutters- be sure there are no leaks and that the drainage is away from the foundation.

Call the chimney sweep. Have a professional inspect and clean the chimney before you start a fire.

Verify that vents are open and unobstructed. It is a dangerous mistake to close off the vents in the crawlspace and attic. You are not keeping heat in but instead actively supporting mold growth. As humidity increases during fall and winter, ineffective ventilation prevents moisture from escaping and mold growth is usually the result. Though vents should be screened to keep out rodents, air should flow freely above the insulation in attics and below the insulation in crawlspaces.

Weatherstrip your windows. If you have old, original windows they can be quite drafty. Weatherstripping can save you considerable money in heating costs.

Disconnect garden hoses. Store hoses in the garage or a shed for the winter.